| Application: | High-voltage |
|---|---|
| Material: | Porcelain |
| Structure: | Pin Insulator |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Porcelain pin insulator SHF-20G1, SHF-20UO
1 Purpose and scope of application.
• Porcelain pin insulator SHF-20G1, SHF-20UO is designed for insulation and
fastening of wires on overhead power lines and in switchgears of power plants and substations of alternating current with voltage over 1000 V, frequency 50 Hz at ambient temperature from plus 50 to minus 60.
2 Main technical characteristics.
• Main technical characteristics of the porcelain pin insulator SHF-20G1, SHF-20UOS are listed in table 1
Table 1 Technical characteristics of the porcelain pin insulator SHF-20G1, SHF-20UO.
• The appearance of the porcelain pin insulator SHF-20G1, SHF-20UO is shown in Figure 1
The porcelain linear SHF-20UO pin insulator is designed for insulation and fastening of insulated SIP-3 wires
Rated voltage, kV 20
Minimum mechanical destructive load, kN 13
Withstand voltage 50 Hz (in the rain), kV 45
Withstand voltage in dry condition, kV 85
Breakdown voltage in the insulating medium, kV 160
The length of the leakage path, mm. 325
In the upper part of the insulator, a plastic sleeve is installed in the gutter between the two ledges
, into which the wire is laid during installation. Delivery
of goods with a plastic sleeve.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}